EnGenius EAP1750H User Manual

User ManualBusiness SolutionsDual Band AC1750 Indoor Access PointCeiling Mount DesignEAP1750Hversion 1.0

10Chapter 2 Before You Begin

11This section will guide you through the installation process. Placement of the EnGenius EAP1750H is essential to maximizetheAccessPoint’sperform

12Windows XP/Windows 7InordertousetheEAP1750H,youmustrstconguretheTCP/IPv4 connection of your Windows OS computer system. 1. Click the St

134. Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties.5. Select Use the following IP address and enter an IP address that i

14Apple Mac OS X1. Go to System Preferences (it can be opened in the Applications folder or by electing it in the Apple Menu).2. Select Network in th

151. Ensure that the computer in use has an Ethernet Controller port (RJ-45 Ethernet Port). For more information, verify with your computer’s user man

16Using the provided hardware, the EAP1750H can be attached to a ceiling or wall.To attach the EAP1750H to a ceiling or wall using the mounting bracke

17Attaching the EAP1750H to a ceiling using the provided T-Rail connectors:1. Attach the T-Rail connectors to the bottom cover of the EAP1750H using

18Chapter 3 Conguring Your Access Point

19This section will show you how to congure the deviceusingtheweb-basedcongurationinterface.Default SettingsPlease use your Ethernet p

2IMPORTANTTo install this Access Point please refer to the Quick Installation Guide included in the product packaging.

20Chapter 4 Building a Wireless Network

21 The EAP1750H has the ability to operate in various modes. This chapter describes the operating modes of the EAP1750H.Access Point ModeInAccessPoi

22WDS AP ModeThe EAP1750H also supports WDS AP mode. This operating mode allows wireless connections to the EAP1750H using WDStechnology.Inthismod

23WDS Bridge ModeInWDSBridgeMode,theEAP1750HcanwirelesslyconnectdifferentLANsbyconguringtheMACaddressandsecuritysettings of each EA

24Chapter 5 Overview

25OverviewThe Overviewsectioncontainsthefollowingoptions:• Device Status• ConnectionsThefollowingsectionsdescribetheseoptions: Device Statu

26ConnectionsThe EAP1750H automatically logs (records) events of possible interest in its internal memory. To view the logged information, click the C

27Chapter 6 Network

28Operation ModesTheEAP1750Hsupportsthreeoperationmodes:Access Point, WDS AP, and WDS Bridge.Device SettingsTo access operation mode, click the

29IP Network SettingsSelect whether the device IP address will use the static IPaddressspeciedintheIPAddresseldorbeobtainedautomatically

3Chapter 1 Product Overview... 4 Key Features/Introduction...

30Forward Delay: Specifes the Bridge Forward Delay, in seconds. Forwarding Delay Time is the time spent in each of the Listening and Learning states

31Chapter 7 2.4 GHz & 5 GHz Wireless

32This page displays the current status of the Wireless settings of the EAP1750H.Access Point/WDS AP mode: Wireless Mode: Supports802.11b/g/nmixedm

332.4GHz/5 GHz SSID ProleUnder Wireless Settings,youcanedittheSSIDproletotyourneeds.ClickEdit under the SSID you would like to make cha

34The Wireless Security section lets you congure thesecuritymodesforEAP1750H:• WEP• WPA-PSK • WPA2-PSK•  WPA-PSKMixed• WPA-Ent

35WPA-PSK (WPA Pre-Shared Key) Encryption:Encryption:SelecttheWPAencryptiontypeyouwouldliketo use. Please ensure that your wireless clients u

36WPA-PSK Mixed Encryption: Encryption:SelecttheWPAencryptiontypeyouwouldliketo use. Please ensure that your wireless clients use the same se

37Interim Accounting Interval: Specify how often, in seconds, the accounting data is sent out. Note: 802.11n does not allow WEP/WPA-PSK TKIP/

38Radius Accounting Server: Enter the IP address ofthe Radius accounting server.Radius Accounting Port: Enter the port number used for connectio

39Radius Accounting Server: Enter the IP address ofthe Radius accounting server.Radius Accounting Port: Enter the port number used for connectio

4Chapter 1 Product Overview

40Wireless MAC Filtering is used to allow or deny network access to wireless clients (computers, tablet PCs, NAS, smartphones, etc.) according to thei

41This page allows you to congure advanced wirelesssettings for the EAP1750H. It is recommended that the defaultsettingsareusedunlessthe

42The Wi-Fi Protected Setup (WPS) feature complies with the Wi-Fi Alliance WPS standard and makes it easier to quickly add client devices to an establ

43Using WDS (Wireless Distribution System) will allow a network administrator or installer to connect to Access Points wirelessly. Doing so will

44Chapter8 Management

45This page allows you to change the EAP1750H username and password. By default, the username is admin and the password is admin.Thepasswordcancon

46Management VLAN SettingsThis page allows you to assign a VLAN tag to the packets. A VLAN is a group of computers on a network whose software hasbee

47Wireless Trafc ShapingTrafc Shaping regulates the ow of packets leaving aninterface to deliver improved Quality of Service. To edit Wire

48SNMP SettingsThis page allows you to assign the Contact Details, Location, Community Name, and Trap Settings for Simple Network Management Protocol

49Priv Protocol: Select the Privacy Protocol type you would like to use.Priv Key: SpeciesthePrivacyKey.Engine ID: SpeciestheEngineIDforSNMPv

5Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditi

50Backup/Restore SettingsThis page allows you to save the current device configurations. When you save custom configurations, you can also reload the

51Auto Reboot SettingsYou can specify how often you would like to reboot the EAP1750H. To configure the Auto Reboot settings, click the Wi-Fi Schedule

52Firmware UpgradeThis page allows you to upgrade the Firmware of the EAP1750H. Check out engeniustech.com periodicaly for updates.To Perform the Firm

53disabledaylightsavingstimefortherEAP1750H.Next,enter the dates that correspond to the present year’s daylight savings start and end times. A

54System LogThis page allows you to setup the System Log and local log functions for the EAP1750H. Click Log under the Systems Manager section to open

55Ping Test Parameters Target IP/Domain Name: Enter the target IP address you would like to search.Ping Packet Size: Enter the packet size in byte

56Speed Test ParametersTarget IP/Domain Name: Enter an IP address or domain name you wish to run a Speed Test for.Time Period/Check Interval: En

57Device DiscoveryUnder Device Discovery, you can choose for the EAP1750H to Automatically scan for local devices to connect to. Click Scan to begin t

58Appendix

59Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital dev

6Out) integrated sectorized 3D antenna array. It’s an ideal solution for spacious interior environments such as large homes,smallandmedium-sizedbu

60Industry Canada StatementThis device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) T

61FOR MOBILE DEVICE USAGE Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environ

62Europe – EU Declaration of ConformityThis device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test m

63This device is a 5GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and

64Français [French] Par la présente [nom du fabricant] déclare que l’appareil [type d’appareil] est conforme aux exigences essentielles et aux autres

7ApplicationsWireless LAN (WLAN) products are easy to install and highlyefcient.Thefollowinglistdescribessomeofthemany applications made pos

8SecurityWEP(64/128bit)WPA/WPA2 (TKIP/AES)Hidden SSIDMACaddressltering,upto50eldsL2 Isolation802.1XAuthenticator(MD5/TLS/TTLS/PEAP)Guest Ne

9Physical InterfaceDimensions and WeightsDiameter:6.36”Height:1.64”Weight:0.65lbs. 1 Reset Button: Press and hold for over 10 seconds to reset t