EnGenius ERB9250 User Manual

EnGenius ERB9250 300M Range Extender User Manual

10 6. Select the target router and click Connect 7. Enter the passwords in the Pre-shared Key column if the target router is encrypted wit

11 8. The connection is established successfully between your router and ERB9250. Now the ERB9250’s SSID is identical with the router’s SSID.

12 WPS Configuration 1. Enable WPS on your router and ensure it is activated (some routers may require you to press a WPS button and hold it down fo

13 Placing Your Range Extender in an Optimal Location After configuring your Range Extender, place it in the location that best suits your needs to

14 Firmware Upgrade You can check for the latest ERB9250 firmware on EnGenius’ website at http://www.engeniustech.com/index.php/home-networking/rout

15 4. Click Management on the left menu and select Firmware. Click Browse and upload the firmware files. Then Click Apply. You can see the firmwar

16 3. System 3.1. Operation Mode This page allows you to change the device operation mode. The ERB9250 supports Universal Repeater (Ran

17 3.2. Status This page allows you to monitor the current status of your router.

18 3.3. Event Log The View Operation Event Log page shows the current system log of the Range Extender. It displays any event which occurred after t

19 3.4. Monitor This shows histograms for network connections on WAN, LAN & WLAN. Auto refresh keeps information updated periodically.

ERB9250 User Manual 2 TABLE OF CONTENTS 1. Introduction ...

20 4. Wireless 4.1. Status The Status screen displays the repeater connection status, WLAN setting, and SSID detail information. 4.2. Basic If you

21 Mode: Universal Repeater mode and Client Bridge mode are available for ERB9250. Band: You can select the wireless spectrum in use. 2.4 GHz(B):

22 4.3. Advanced Fragment Threshold: This specifies the maximum size of a packet during the fragmentation of data which is to be transmitted. If th

23 CTS Protection: It is recommended to enable the protection mechanism. This mechanism can decrease the rate of data collision between 802.

24 4.5. Filter This Range Extender supports MAC Address Control, which prevents unauthorized clients from accessing your wireless network. Enable

25 4.6. WPS WPS allows you to activate client WPS and synchronize with other routers. Click Start to Process to initiate WPS process. It works like

26 5. Network 5.1. Status IP address: Current IP address of the Range Extender IP Subnet Mask: 255.255.255.0 is the default Subnet Mask of ERB92

27 6. Management 6.1. Admin The default password is admin. It is recommended to change the password to secure your ERB9250 Range Extender after

28 The Configure section allows you to reset the ERB9250 to factory default, save the existing Range Extender configurations, and upload any saved E

29 7. Tools 7.1. Time Setting Time Setup: You can select either Synchronize with the NTP Server or Synchronize with PC. Time Zone: Select the time

ERB9250 User Manual 3 6. Management ... 27 6.1.

30 Synchronize with PC: Synchronizes timer with your Local PC time. PC Date and Time: This field displays the PC date and time. Daylight Saving T

31 8. Logout Click on Logout button to logout.

Troubleshooting Cannot access the Internet after successfully setup ERB9250 with your router After you have set up the ERB9250 with your router, move

ERB9250 User Manual 4 1. Introduction ERB9250 is a 2.4GHz 802.11b/g/n Range Extender. You can extend the reach of your wireless network to areas wi

ERB9250 User Manual 5 1.1. Package Contents Open the package carefully, and make sure that none of the items which are listed below are missing. Do

ERB9250 User Manual 6 RP-SMA Antenna Connections

LED Description Table LED Description LAN : (1) Blue Link  solid, Traffic  blinking WLAN : (1) Blue Link  solid, Traffic  blinking Power/Sta

8 2. Installation Getting Started 1. Confirm that your Internet and the wireless network are active before powering on your Range Extender. 2. Co

9 Quick Manual Configuration 1. Power on the ERB9250. 2. Disable any wireless connections present on the computer before setting up ERB9250. 3.