EnGenius ESR6650 User Manual download pdf (Page 60)

Enable Port Forwarding: Enable or disable Port Forwarding.

Description: The description of this setting.

Local IP / Local Port: This is the LAN Client/Host IP address and Port number that the

Public Port number packet will be sent to.

Protocol: Select the port number protocol type (TCP, UDP or both). If you are unsure, then

leave it to the default “both” setting. Public Port enters the service (service/Internet

application) port number from the Internet that will be re-directed to the above Private

IP address host in your LAN Network.

Public Port: Port number will be changed to Local Port when the packet enters your LAN

Network.

Add Port Forwarding

Fill in the "Description" , "Local IP", "Local Port", "Protocol" and “Public Port” of

the setting to be added and then click <Add> button. Then this Virtual Server setting

will be added into the "Current Port Forwarding Table" below. If you find any typo

before adding it and want to retype again, just click <Reset> and the fields will be

cleared.

Remove Port Forwarding

If you want to remove Port Forwarding settings from the "Current Port Forwarding

Table", select the Port Forwarding settings you want to remove in the table and then

click "Delete Selected". If you want to remove all Port Forwarding settings from the

table, just click the <Delete All> button. Click <Reset> will clear your current

selections.

Click <Apply> at the bottom of the screen to save the above configurations.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 95 96

No comments

EnGenius ESR6650 User Manual Page 60