LONG RANGE WIRELESS ACCESS POINT / CLIENT BRIDGE Model : ENH200EXT User Manual Version : 1.0
2.3 Client Bridge In the Client Bridge Mode, the ENH200EXT function likes a wireless client connecting to an Access Point wirelessly and surf internet
2.5 Client Router In the Client Router Mode, the ENH200EXT has DHCP Server build inside that allows many LANs automatically generate an IP address to
3 Computer Configuration Instruction The default operating mode is Client Bridge. Client Bridge will not assign an IP address to the computer/notebook
3.2 Logging Method After complete the IP settings from last section, you can now access the web-based configuration menu. 1. Open web browser 2. Ent
4 Status Status section is on the navigation drop-down menu. You will then see three options: Main, Wireless Client List, System Log, WDS Link Status,
4.2 Main Click on the Main link under the Status drop-down menu or click Home from the top-right of the webpage. The status that is displayed correspo
4.3 Wireless Client List Click on the Wireless Client List link under the Status drop-down menu. This page displays the list of Clients that are assoc
4.4 System Log Click on the System Log link under the Status drop-down menu. The device automatically logs (records) events of possible interest in it
4.5 Connection Status Click on the Connection Status link under the Status drop-down menu. This page displays the current status of the network, inclu
Table of Contents 1 PRODUCT OVERVIEW ...
4.6 DHCP Client Table Click on the DHCP Client List link under the Status drop-down menu. This page displays the list of Clients that are associated t
5 System 5.1 Switching Operation Mode The ENH200EXT supports 4+1 operation modes: Access Point, Client Bridge, WDS Bridge, and Client Router. In order
If you would like to use Access Point with WDS Function mode, please select Access Point Mode and then enable WDS function in the Wireless Network sec
6 Wireless Configuration This section will guide you through all the wireless settings. Please read the instruction carefully. Inappropriate setting c
Wireless Mode The wireless mode supports 802.11b/g/n mixed modes. It is compatible with the most common known wireless band. Channel HT Mode The def
SSID Specify the SSID for current profile. VLAN ID Specify the VLAN tag for current profile. Suppressed SSID Place a Check to hide the SSID. Clien
6.1.2 Client Bridge Mode Wireless Mode The wireless mode supports 802.11b/g/n mixed modes. It is compatible with the most common known wireless band
Profile After Site Survey, webpage will display all nearby area’s Access Point. Click the BSSID if you would like to connect with it. Wireless Secur
6.1.3 WDS Bridge Mode Wireless Mode The wireless mode supports 802.11b/g/n mixed modes. It is compatible with the most common known wireless band. C
MAC Address Enter the Access Point’s MAC address that you would like to extend the wireless area into the MAC address filter. Mode Select Disable o
6.2.5 WPA...
6.1.4 Client Router Mode Wireless Mode The wireless mode supports 802.11b/g/n mixed modes. It is compatible with the most common known wireless band
Profile After Site Survey, webpage will display all nearby area’s Access Point. Click the BSSID if you would like to connect with it. Wireless Secur
6.2 Wireless Security Settings Wireless Security Settings section will guide you to the entire Security modes configuration: WEP, WPA-PSK, WPA2-PSK, W
6.2.2 WPA-PSK Security Mode Select WPA-PSK from the drop down list to begin the configuration. Encryption Select Both, TKIP or AES for Encryption t
6.2.3 WPA2-PSK Security Mode Select WPA2-PSK from the drop down list to begin the configuration. Encryption Select Both, TKIP or AES for Encryption
6.2.4 WPA-PSK Mixed Security Mode Select WPA-PSK Mixed from the drop down list to begin the configuration. Encryption Select Both, TKIP or AES for
6.2.5 WPA Security Mode Select WPA from the drop down list to begin the configuration. Encryption Select Both, TKIP or AES for Encryption type. Rad
6.2.6 WPA2 Security Mode Select WPA2 from the drop down list to begin the configuration. Encryption Select Both, TKIP or AES for Encryption type. R
6.2.7 WPA Mixed Security Mode Select WPA Mixed from the drop down list to begin the configuration. Encryption Select Both, TKIP or AES for Encrypt
6.3 Wireless Advanced Settings Data Rate Select Data Rate from the drop down list. Data rate will affect the efficiency of the throughput. If the da
About This Document This document is written by EnGenius Inc. EnGenius Inc. has rights to change any of this document without notice and all rights r
10% of the internet speed during the data transmission. For example, the 802.11a/g’s GI is 800us, the short GI will be 400us. Aggregation Aggregation
6.4 Wireless MAC Filter Wireless MAC Filters is used to Allow or Deny wireless clients, by their MAC addresses, accessing the Network. You can manual
6.5 WDS Link Settings WDS Link Settings is used to establish a connection between Access Points but the device is not losing Access Point function. A
7 LAN Setup This section will guide you to setup the Local Area Network (LAN) settings 7.1 IP Settings This section is only available for Non-Router M
7.2 Spanning Tree Settings Spanning Tree Status Select the Radio button to On or Off Spanning Tree function. Bridge Hello Time Specify Bridge Hello
8 Router Settings This section is only available for AP Router Mode and Client Router Mode. 8.1 WAN Settings There are four different types of WAN con
Internet Connection Type Select Static IP to begin configuration of the Static IP connection. Account Name Specify Account Name that is provided by I
8.1.2 DHCP (Dynamic IP) Select DHCP as your WAN connection type to obtain your IP address automatically. You will need to enter Account Name as your h
Accept / Cancel Press Accept to confirm the changes or Cancel to return previous settings. Accept does not compile the changes, you must go to Stat
8.1.3 PPPoE (Point-to-Point Protocol over Ethernet) Select PPPoE as your WAN connection type if your ISP provides Username and Password. PPPoE is a DS
1 Product Overview Thank you for using ENH200EXT. It is a powerful, enhanced, enterprise scale product with 4 multi-functions Access Point, Client Bri
Connect on Demand Select the Radio button to specify the maximum idle time. Internet connection will disconnect when it reach the maximum idle time,
8.1.4 PPTP (Point-to-Point Tunneling Protocol) Select PPTP as your WAN connection type if your ISP provides information about IP Address, Subnet Mask,
IP Address Specify WAN port IP address. IP Subnet Mask Specify WAN IP Subnet Mask. Gateway IP Address Specify WAN Gateway IP address. PPTP Server
8.2 LAN Settings (Router Mode) IP Address Specify LAN port IP address. IP Subnet Mask Specify LAN IP Subnet Mask. WINS Server IP Specify WINS Serv
8.3 VPN Pass Through VPN Pass Through is used to allow certain protocol to be tunneled through an IP network such as PPTP and L2TP or implement secure
8.4 Port Forwarding Port Forwarding is used to allow a public service such as Web Server, Mail Server, and FTP server to be set up. For example: Set u
settings. 8.5 DMZ Enable DMZ will expose your network computer to the internet. This feature may be used in some circumstance such as Internet Gaming
9 Management Settings Management section is on the navigation drop-down menu. You will then see seven options: administration, management VLAN, SNMP s
enter following http://<IP address>:8080 to access the web interface. Save/Apply / Cancel Press Save/Apply to apply the changes or Cancel to re
9.2 Management VLAN Click on the Management VLAN link under the Management menu. This option allows you to assign a VLAN tag to the packets. A VLAN is
e) Wireless extensions to Ethernet networks Network managers in dynamic environments can minimize the overhead caused by moves, extensions to network
9.3 SNMP Settings Click on the SNMP Settings link under the Management menu. This is a networking management protocol used to monitor network-attached
9.4 Backup/Restore Settings Click on the Backup/Restore Setting link under the Management menu. This option is used to save the current settings of th
9.5 Firmware Upgrade Click on the Firmware Upgrade link under the Management menu. This page is used to upgrade the firmware of the device. Make sure
9.6 Time Settings Click on the Time Settings link under the Management menu. This page allows you to configure the time on the device. You may do this
9.7 Log Click on the Log link under the Management menu. The Log page displays a list of events that are triggered on the Ethernet and Wireless interf
9.8 Diagnostics Click on the Diagnostics link under the Management menu. This function allows you to detect connection quality and trace the routing t
10 Network Configuration Example This chapter describes the role of the ENH200EXT with 4+1 modes. The Access Point mode’s default configuration is a c
Client IP address must configure manually at the same subnet in Local Area Network. 10.2 Client Bridge Mode Client Bridge Mode functions like a wirele
10.3 WDS Bridge Mode Use this feature to link multiple APs in a network. All clients associated with any APs can communicate each other like an ad-hoc
10.4 Client Router In the Client Router Mode, the ENH200EXT has DHCP Server build inside that allows many LANs automatically generate an IP address to
information. It has support adjusting transmit power and channel. Client can access the network with different regulatory settings and automatically c
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class
Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1)
Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test me
Česky [Czech] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnic
[Slovak] ustanovenia Smernice 1999/5/ES. Suomi [Finnish] [Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkint
1.3 Package Contents Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packing materials,
2 ENH200EXT Multi-Function Instruction Guide 2.1 Access Point In the Access Point Mode, ENH200EXT function likes a central connection for any station
Comments to this Manuals