EnGenius ENH200 User Manual download pdf (Page 85)

12.4 Client Router

In Client Router Mode, the ENH200’s internal DHCP server allows LANs to automatically

generate an IP address to share the same Internet. Connect an Access Point/WISP wirelessly

and connect to LANs using a wired connection.

Refer to Chapter 13 to check the Access Point’s configuration.

Client Router

Step1 Log in to the Web Configurator with the default IP address

192.168.1.1

Step2 Select your country or region’s regulation.

Step3

For Operation Mode, select Client Router from System

Properties.

Step4

Change your Local Area Network setting to Obtain an IP

Address Automatically.

Step5

Use site survey to scan Access Points that are available in

nearby areas.

Step6 Select the Access Point with you want to associate.

Step7

Set up authentication settings that match the Access Point’s

settings.

Step8 Set your WAN connection type using the WAN settings provided

by your ISP.

Step9

Click Apply to save all changes.

Client Router’s IP setting must match to the Access Point’s subnet.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 99 100

No comments

EnGenius ENH200 User Manual Page 85