EnGenius ENH200 User Manual download pdf (Page 66)

10 Network Configuration Example

This chapter describes the role of the ENH200EXT with 4+1 modes. The Access Point mode’s

default configuration is a central unit of the wireless network or as a root device of the wired

environment. Repeater mode and Mesh network mode need future configuration.

10.1 Access Point

Access Point

Step1 Login to the web-based configuration interface with default IP

192.168.1.1

Step2 Select your country or region’s regulation.

Step3

Use site survey to scan channels that have been used in nearby

area.

Step4 Select channel with less interferences.

Step5

Specify the SSID for your broadcast SSID and you can also

configure multiple SSID at the same time.

Step6 Verify VLAN identifier to separate services among clients

Step7 Setup the authentication settings.

Step8 Apply to process all the configurations.

For more advanced settings, please refer to the previous chapters.

Wireless Client

Step1 Select wireless mode you would like to associate with.

Step2

Use site survey to scan nearby Access Point and select the certain

AP you would like to connect with or enter SSID manually.

Step3 Configure VLAN ID in your wireless device if available.

Step4 Select correct authentication type and password.

ENH200EXT’s Access Point Mode does not provide DHCP server so the Wireless

ENH200EXT

Client

SSID2

SSID1

Ethernet

Client

192.168.1.1

192.168.1.10

192.168.1.11

192.168.1.12

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 72 73 74

No comments

EnGenius ENH200 User Manual Page 66