EnGenius ENH202 User Manual download pdf (Page 65)

Port if you specify the Port number is 8080, then you will need to enter

the following http://IP address:8080 to access the web interface.

Save / Apply / Cancel Press Save / Apply to confirm the changes or Cancel to return

previous settings.

Pressing Save / Apply will change the settings immediately. It is not

reversible unless the settings are changed again or the device is reset.

10.2 Management VLAN

Click on the Management VLAN link under the Management menu. This option allows you

to assign a VLAN tag to packets. A VLAN is a group of computers on a network whose

software has been configured so that they behave as if they were on a separate Local Area

Network (LAN). Computers on a VLAN do not have to be physically located next to one

another on the LAN.

Management VLAN ID If your network includes VLANs and if tagged packets need to

pass through the Access Point, specify the VLAN ID in this field. If

not, select the No VLAN tag radio button.

Accept / Cancel Press Accept to confirm the changes or Cancel to return

previous settings.

Please make note of the following:

1. Accept does not apply the changes – you must go to Status -> Save / Load to apply

the new settings. Please refer to Chapter 4.1 for more information.

2. If you reconfigure the Management VLAN ID, you may lose connection to the

ENH202. Verify the DHCP server can support the reconfigured VLAN ID, and then

re-connect to the new IP address.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 87 88

No comments

EnGenius ENH202 User Manual Page 65