EnGenius ENH202 User Manual download pdf (Page 66)

10.3 SNMP Settings

Click on the SNMP Settings link under the Management menu. This is a networking

management protocol used to monitor network-attached devices. SNMP allows messages

[called protocol data units] to be sent to various parts of a network. Upon receiving these

messages, SNMP-compatible devices [called agents] return data stored in their Management

Information Databases.

SNMP Enable/Disable Select the Radio button to Enable or Disable SNMP function.

Contact Specify the contact details of the device.

Location Specify the location of the device.

Community Name Specify the password for access the SNMP community for read

only access.

Community Name Specify the password for access the SNMP community for read

and write access.

Trap Destination IP

Address

Specify the IP address that will receive the SNMP trap.

Trap Destination

Community Name

Specify the password of the SNMP trap community.

Save / Apply / Cancel Press Save / Apply to confirm the changes or Cancel to return

previous settings.

Accept does not apply the changes – you must go to Status -> Save / Load

to apply the new settings. Please refer to Chapter 4.1 for more information.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 87 88

No comments

EnGenius ENH202 User Manual Page 66