28
PoE Port Settings
The EnGenius Layer 2 PoE+ Switches supports Power
over Ethernet (PoE) as dened by the IEEE 802.3af and
802.3at.AllportscansupportPoEupto30W.Ports1-24
cansupplyabout48VDCpowertoPoweredDevices(PDs)
over standard UTP Ethernet cables. The Switch follows the
standard PSE (Power Sourcing Equipment) pinout, whereby
power is sent out over pins 1, 2, 3 and 6.
EGS5212FP: Ports 1-8 supports both IEEE802.3 af and at. The
maximum power budget is 130 Watts.
EGS7228P: Ports 1-24 supports both IEEE802.3 af and at. The
maximumpowerbudgetis185Watts.
EGS7228FP: Ports 1-24 supports both IEEE802.3 af and at. The
maximum power budget is 370 Watts and 720 Watts when you are
using the EnGenius RPS370 external redundant power supply.
EGS7252FP: Ports 1-48 supports both IEEE802.3 af and at. The
maximum power budget is 740 Watts.
To access the page, click PoE Port Settings under PoE in
the System Menu. To scroll, click the arrow button at the
top right of the screen.
Port:
DisplaysthespecicportforwhichPoEparametersaredened.
PoE parameters are assigned to the powered device that is
connected to the selected port.
State:
• Enable – Enables the Device Discovery protocol and provides
power to the device using the PoE module. The Device Discovery
Protocol lets the device discover powered devices attached to
deviceinterfacesandlearnstheirclassication.
• Disable – Disables the Device Discovery protocol and halts
the power supply delivering power to the device using the PoE
module.
Priority:
Selecttheportpriorityifthepowersupplyislow.Theeld
default is Low. For example, if the power supply is running
at 99% usage, and port 1 is prioritized as high, but port 6 is
prioritized as low, port 1 is prioritized to receive power and port
6maybedeniedpower.Thepossibleeldvaluesare:4.
• Low – Sets the PoE priority level as low.
• Medium – Sets the PoE priority level as medium.
• High – Sets the PoE priority level as high.
• Critical – Sets the PoE priority level as critical.
Comments to this Manuals