EnGenius EGS7228P User Manual download pdf (Page 29)

Class(Auto):

Showstheclassicationofthepowereddevice.Theclass

denesthemaximumpowerthatcanbeprovidedtothe

powereddevice.Thepossibleeldvaluesare:

• Class 0 – The maximum power level at the Power Sourcing.

Equipment is 15.4 Watts.

• Class 1 – The maximum power level at the Power Sourcing.

Equipment is 4.0 Watts.

• Class 2 – The maximum power level at the Power Sourcing.

Equipment is 7.0 Watts.

• Class 3 – The maximum power level at the Power Sourcing.

Equipment is 15.4 Watts.

• Class 4 – The maximum power level at the Power Sourcing.

Equipment is 30 Watts.

Class (User

Select this option to base the power limit on the value

conguredintheUserPowerLimiteld.

User Power

Limit:

Sets the maximum amount of power that can be delivered

by a port.

Note: The User Power Limit can only be implemented

when the Class value is set to User-Dened.

Status:

Showstheport’sPoEstatus.Thepossibleeldvaluesare:

• Delivering Power – The device is enabled to deliver

power via the port.

• Disabled – The device is disabled for delivering power via

the port.

• Test Fail – The powered device test has failed. For

example, a port could not be enabled and cannot be used to

deliver power to the powered device.

• Testing - The powered device is being tested. For

example,apowereddeviceistestedtoconrmitisreceiving

power from the power supply.

• Searching –The device is currently searching for a

powered device. Searching is the default PoE operational status.

• Fault – The device has detected a fault on the powered

device when the port is forced on. For example; the power

supply voltage is out of range, a short short occurs, a

communication or there is a communication errorwith PoE

devices, or an unknown error occurs.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 150 151

No comments

EnGenius EGS7228P User Manual Page 29