EnGenius EGS7228P User Manual download pdf (Page 33)

Whenyouaggregateports,theportsandLAGmustfulll

the following conditions:

• All ports within a LAG must be the same media/

format type.

 •AVLANisnotconguredontheport.

• The port is not assigned to another LAG.

 •TheAuto-negotiationmodeisnotconguredon

the port.

• The port is in full-duplex mode.

 •AllportsintheLAGhavethesameingresslter

ing and tagged modes.

• All ports in the LAG have the same back pressure

 andowcontrolmodes.

• All ports in the LAG have the same priority.

• All ports in the LAG have the same transceiver

type.

 •PortscanbeconguredasLACPportsonlyifthe

 portsarenotpartofapreviouslyconguredLAG.

LACP is a dynamic protocol which helps to automate

thecongurationandmaintenanceofLAG’s.Themain

purposeofLACPistoautomaticallycongureindividual

links to an aggregate bundle, while adding new links and

helping to recover from link failures if the need arises.

LACP can monitor to verify if all the links are connected

to the authorized group. LACP is a standard in comput-

er networking, hence LACP should be enabled on the

Switch’s trunk ports initially in order for both the partic-

ipating Switches/devices that support the standard, to

use it.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 150 151

No comments

EnGenius EGS7228P User Manual Page 33