138
Ping Test
The Packet INternet Groper (Ping)Test allows you to
verify connectivity to remote hosts. The Ping test
operates by sending Internet Control Message Protocol
(ICMP) request packets to the tested host and waits
for an ICMP response. In the process it measures the
time from transmission to reception and records any
packetloss.SendapingrequesttoaspeciedIPv4
address. Check whether the Switch can communicate
with a particular network host before testing.
Ping Test Settings
You can vary the test parameters by entering the data in
the appropraite boxes. To verify accuracy of the test, it
is reccomended that you run multiple tests in case of a
test fault or user error.
IP address:
Enter the IP address or the host name of the station
you want the Switch to ping to.
Count:
Enter the number of ping to send. The range is from
1–5 and the default is 1.
Interval:
Enter the number of seconds between pings sent.
The range is from 1–5 and the default is 4.
Size:
Enter the size of ping packet to send. The range is
from8–5120andthedefaultis56.
Result:
Displays the Ping Test results.
Click Test to perform the ping tests.
Comments to this Manuals