EnGenius EGS7228P User Manual download pdf (Page 21)

21

Dynamic IP Address (DHCP):

EnablestheIPaddresstobecongured

automatically by the DHCP server.

Select this option if you have a DHCP

server that can assign the Switch an IP

address, subnet mask, default gateway

IP address, and a domain name server

IP address automatically. Selecting this

eld disables the IP Address, Subnet

mask,andGatewayelds.

Static IP Address:

Allows the entry of an IP address,

subnet mask, and a default gateway

for the Switch. Select this option if

you don’t have a DHCP server or if

you wish to assign a static IP address

to the Switch.

IP Address:

This eld allows the entry of an

IPv4 address to be assigned to this

IP interface. Enter the IP address

of your Switch in dotted decimal

notation. The factory default value

is: 192.168.0.239.

Subnet Mask:

A Bitmask that determines the

extent of the subnet that the Switch

is on. This should be labeled in the

form: xxx.xxx.xxx.xxx, where each

xxx is a number (represented in

decimals) between 0 and 255. The

value should be 255.0.0.0 for a Class

A network, 255.255.0.0 for a Class

B network, and 255.255.255.0 for a

Class C network, but custom subnet

masks are allowed. Enter the IP

subnet mask of your Switch in dotted

decimal notation. The factory default

value is: 255.255.255.0.

Gateway:

Enter an IP address that determines

where packets with a destination

address outside the current subnet

should be sent. This is usually the

address of a router or a host acting

as an IP gateway. If your network

is not part of an Intranet, or you do

not want the Switch to be accessible

outside your local network, you can

leavethiseldblank.

DNS Server (Domain Name

System):

Used for mapping a domain name

to its corresponding IP address and

vice versa. Enter a DNS IP address

in order to be able to use a domain

name to access the Switch instead

of using an IP address.

Apply: Click APPLY to update the the system settings.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 150 151

Comments to this Manuals

No comments